 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| DIM1600FSS12-A000 Single Switch IGBT Module DS5541-2.4 January 2009 (LN26557) FEATURES 10s Short Circuit Withstand Non Punch Through Silicon Isolated Copper Baseplate KEY PARAMETERS VCES VCE (sat)* (typ) IC (max) IC(PK) (max) * 1200V 2.2V 1600A 3200A Lead Free construction (measured at the power busbars and not the auxiliary terminals) External connection APPLICATIONS High Power Inverters Motor Controllers 7 (C) 9 (G) 1 (C) 2 (C) The Powerline range of high power modules includes half bridge, chopper, dual, single and bidirectional switch configurations covering voltages from 1200V to 3300V and currents up to 2400A. The DIM1600FSS12-A000 is a single switch 1200V, n channel enhancement mode, insulated gate bipolar transistor (IGBT) module. The IGBT has a wide reverse bias safe operating area (RBSOA) plus full 10 s short circuit withstand. The module incorporates an electrically isolated base plate and low inductance construction enabling circuit designers to optimise circuit layouts and utilise grounded heat sinks for safety. 8 (E) 3 (E) External connection 4 (E) Fig. 1 Circuit configuration ORDERING INFORMATION Order As: DIM1600FSS12-A000 Note: When ordering, please use the whole part number. Outline type code: F (See package details for further information) Fig. 2 Module package . Caution: This device is sensitive to electrostatic discharge. Users should follow ESD handling procedures. 1/9 www.dynexsemi.com DIM1600FSS12-A000 SEMICONDUCTOR ABSOLUTE MAXIMUM RATINGS Stresses above those listed under `Absolute Maximum Ratings' may cause permanent damage to the device. In extreme conditions, as with all semiconductors, this may include potentially hazardous rupture of the package. Appropriate safety precautions should always be followed. Exposure to Absolute Maximum Ratings may affect device reliability. Tcase = 25 unless stated otherwise C Symbol VCES VGES IC IC(PK) Pmax It Visol 2 Parameter Collector-emitter voltage Gate-emitter voltage Continuous collector current Peak collector current Max. transistor power dissipation Diode I t value (IGBT arm) Isolation voltage - per module 2 Test Conditions VGE = 0V Max. 1200 20 Units V V A A W kA S V 2 Tcase = 85 C 1ms, Tcase =115 C Tcase = 25 Tj = 150 C, C VR = 0, tP = 10ms, Tvj = 125 C Commoned terminals to base plate. AC RMS, 1 min, 50Hz 1600 3200 13890 400 2500 Caution: This device is sensitive to electrostatic discharge. Users should follow ESD handling procedures 2/9 www.dynexsemi.com DIM1600FSS12-A000 SEMICONDUCTOR THERMAL AND MECHANICAL RATINGS Internal insulation material: Baseplate material: Creepage distance: Clearance: CTI (Critical Tracking Index): Al2O3 Copper 20mm 10mm 350 Symbol Parameter Test Conditions Min. Typ. Max. Units Rth(j-c) Thermal resistance - transistor Continuous dissipation - junction to case Continuous dissipation - junction to case - - 9 C/kW Rth(j-c) Thermal resistance - diode - - 20 C/kW Rth(c-h) Thermal resistance - case to heatsink (per module) Mounting torque 5Nm (with mounting grease) Transistor Diode - - 8 C/kW Tj Junction temperature -40 - - 150 125 125 5 2 10 C C C Nm Nm Nm Tstg - Storage temperature range Screw torque Mounting - M6 Electrical connections - M4 Electrical connections - M8 Caution: This device is sensitive to electrostatic discharge. Users should follow ESD handling procedures 3/9 www.dynexsemi.com DIM1600FSS12-A000 SEMICONDUCTOR ELECTRICAL CHARACTERISTICS Tcase = 25C unless stated otherwise. Symbol Ices Parameter Collector cut-off current Test Conditions VGE = OV, VCE = VCES VGE = OV, VCE = VCES, Tcase = 125 C Min. 4.5 I1 I2 - Typ. 5.5 2.2 2.6 2.1 2.1 180 15 0.27 11000 9000 Max. 2.0 50 8 6.5 2.8 3.3 1600 3200 2.4 2.4 - Units mA mA A V V V A A V V nF nH m A A Ices VGE(TH) VCE(sat) Gate leakage current Gate threshold voltage Collector-emitter saturation voltage VGE = 20V, VCE = 0V IC = 80mA, VGE = VCE VGE = 15V, IC = 1600A VGE = 15V, IC = 1600A, Tcase = 125 C IF IFM VF Diode forward current Diode maximum forward current Diode forward voltage DC tp = 1ms IF = 1600A IF = 1600A, Tcase = 125 C Cies LM RINT SCData Input capacitance Module inductance Internal transistor resistance Short circuit. Isc VCE = 25V, VGE = 0V, f = 1MHz Tj = 125 Vcc = 900V, C, tp 10s, Vge VCE(max) = VCES - L.* xdi/dt IEC 60747-9 Note: Measured at the power busbars and not the auxiliary terminals * L is the circuit inductance + LM Caution: This device is sensitive to electrostatic discharge. Users should follow ESD handling procedures 4/9 www.dynexsemi.com DIM1600FSS12-A000 SEMICONDUCTOR ELECTRICAL CHARACTERISTICS Tcase = 25C unless stated otherwise. Symbol td(off) tf EOFF td(on) tr EON Qg Qrr Irr EREC Parameter Turn-off delay time Fall time Turn-off energy loss Turn-on delay time Rise time Turn-on energy loss Gate charge Diode reverse recovery charge Diode reverse current Diode reverse recovery energy IF = 1600A, VR = 600V, dlF/dt =8200A/s Test Conditions IC = 1600A VGE = 15V VCE = 600V RG(ON) = RG(OFF) = 1.5 L 100nH Min. Typ. 1250 180 300 250 200 80 18 150 750 90 Max. Units ns ns mJ ns ns mJ C C A mJ Tcase = 125 unless stated otherwise. C Symbol td(off) tf EOFF td(on) tr EON Qrr Irr EREC Parameter Turn-off delay time Fall time Turn-off energy loss Turn-on delay time Rise time Turn-on energy loss Diode reverse recovery charge Diode reverse current Diode reverse recovery energy IF = 1600A, VR = 600V, dlF/dt = 7500A/s Test Conditions IC = 1600A VGE = 15V VCE = 600V RG(ON) = RG(OFF) = 1.5 L 60nH Min. Typ. 1500 200 350 350 220 150 350 900 160 Max. Units ns ns mJ ns ns mJ C A mJ Caution: This device is sensitive to electrostatic discharge. Users should follow ESD handling procedures 5/9 www.dynexsemi.com DIM1600FSS12-A000 SEMICONDUCTOR Fig.3 Typical output characteristics Fig.4 Typical output characteristics Fig.5 Typical switching energy vs collector current Fig.6 Typical switching energy vs gate resistance Caution: This device is sensitive to electrostatic discharge. Users should follow ESD handling procedures 6/9 www.dynexsemi.com DIM1600FSS12-A000 SEMICONDUCTOR Fig.7 Diode typical forward characteristics Fig.8 Reverse bias safe operating area Fig.9 Diode reverse bias safe operating area Fig.10 Transient thermal impedance Caution: This device is sensitive to electrostatic discharge. Users should follow ESD handling procedures 7/9 www.dynexsemi.com DIM1600FSS12-A000 SEMICONDUCTOR PACKAGE DETAILS For further package information, please visit our website or contact Customer Services. All dimensions in mm, unless stated otherwise. DO NOT SCALE. 130 0.5 114 0.1 4 x M8 57 0.25 57 0.25 29.2 0.5 screwing depth max 16 20 0.1 140 0.5 124 0.25 30 0.2 11 0.2 35 0.2 2.5 0.2 3 x M4 16 0.2 18.5 0.2 6 x O7 14.5 0.2 5.25 0.3 28 0.5 screwing depth max 8 61.4 0.3 18 0.2 7(C) 9(G) +1.5 - 0.0 external connection 1(C) 2(C) 5 0.2 38 8(E) 3(E) external connection 4(E) Nominal weight: 1500g Module outline type code: F Caution: This device is sensitive to electrostatic discharge. Users should follow ESD handling procedures 8/9 www.dynexsemi.com DIM1600FSS12-A000 SEMICONDUCTOR POWER ASSEMBLY CAPABILITY The Power Assembly group was set up to provide a support service for those customers requiring more than the basic semiconductor, and has developed a flexible range of heatsink and clamping systems in line with advances in device voltages and current capability of our semiconductors. We offer an extensive range of air and liquid cooled assemblies covering the full range of circuit designs in general use today. The Assembly group offers high quality engineering support dedicated to designing new units to satisfy the growing needs of our customers. Using the latest CAD methods our team of design and applications engineers aim to provide the Power Assembly Complete Solution (PACs). HEATSINKS The Power Assembly group has its own proprietary range of extruded aluminium heatsinks which have been designed to optimise the performance of Dynex semiconductors. Data with respect to air natural, forced air and liquid cooling (with flow rates) is available on request. For further information on device clamps, heatsinks and assemblies, please contact your nearest sales representative or Customer Services. http://www.dynexsemi.com e-mail: power_solutions@dynexsemi.com HEADQUARTERS OPERATIONS DYNEX SEMICONDUCTOR LTD Doddington Road, Lincoln Lincolnshire, LN6 3LF. United Kingdom. Tel: +44(0)1522 500500 Fax: +44(0)1522 500550 CUSTOMER SERVICE Tel: +44(0)1522 502753 / 502901. Fax: +44(0)1522 500020 Dynex Semiconductor 2003 TECHNICAL DOCUMENTATION - NOT FOR RESALE. PRODUCED IN UNITED KINGDOM. Datasheet Annotations: Dynex Semiconductor annotate datasheets in the top right hand corner of the front page, to indicate product status. The annotations are as follows:- Target Information: This is the most tentative form of information and represents a very preliminary specification. No actual design work on the product has been started. Preliminary Information: The product is in design and development. The datasheet represents the product as it is understood but details may change. Advance Information: The product design is complete and final characterisation for volume production is well in hand. No Annotation: The product parameters are fixed and the product is available to datasheet specification. This publication is issued to provide information only which (unless agreed by the Company in writing) may not be used, applied or reproduced for any purpose nor form part of any order or contract nor to be regarded as a representation relating to the products or services concerned. No warranty or guarantee express or implied is made regarding the capability, performance or suitability of any product or service. The Company reserves the right to alter without prior notice the specification, design or price of any product or service. Information concerning possible methods of use is provided as a guide only and does not constitute any guarantee that such methods of use will be satisfactory in a specific piece of equipment. It is the user's responsibility to fully determine the performance and suitability of any equipment using such information and to ensure that any publication or data used is up to date and has not been superseded. These products are not suitable for use in any medical products whose failure to perform may result in significant injury or death to the user. All products and materials are sold and services provided subject to the Company's conditions of sale, which are available on request. All brand names and product names used in this publication are trademarks, registered trademarks or trade names of their respective owners. Caution: This device is sensitive to electrostatic discharge. Users should follow ESD handling procedures 9/9 www.dynexsemi.com |
Price & Availability of DIM1600FSS12-A000
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |